Difference between revisions of "WDTVLiveSerial"
From WikiDLXTV
(Added shell removal video by b-rad) |
|||
| Line 34: | Line 34: | ||
== Tips == | == Tips == | ||
* When connecting the TTL cable try reversing RX/TX if you don't get the console. | * When connecting the TTL cable try reversing RX/TX if you don't get the console. | ||
| + | * You can remove the top cover by pulling on it firmly to expose the inner PCB. Details in this video by b-rad: http://b-rad.cc/binaries/WDTV.Shell.Removal.AVI | ||
Revision as of 22:53, 18 August 2011
3.3V TTY Serial Port
You will need a TTL-Serial cable. I use an adapted Nokia CA-42 USB to TTL-Serial cable, but you can use whatever cable you want/have.
These little serial cables come in handy when working on embedded boards like this.
Here is some information on how to make a CA-42 into a USB to TTL-Serial cable.
The wire colors may be different, so be careful!
WDTV Live serial port
You only need to connect the RX, TX, and Gnd. NOT THE 5Volt pin. CAREFUL!!
WDTV circuit board | CN4 pinout
| .---------.
| | o o o o |
CN4 | '---------'
.------. | ^ ^ ^ ^
| .... | | / | | \
'------' O | +5V RX TX gnd
'--------------------'
COM port settings
| Speed | 115200 |
|---|---|
| Data | 8 |
| Parity | None |
| Stop | 1 |
| Flow Control | None |
Tips
- When connecting the TTL cable try reversing RX/TX if you don't get the console.
- You can remove the top cover by pulling on it firmly to expose the inner PCB. Details in this video by b-rad: http://b-rad.cc/binaries/WDTV.Shell.Removal.AVI
Reference threads
- http://forum.wdlxtv.com/viewtopic.php?f=43&t=804&p=5596#p5596
- http://forum.wdlxtv.com/viewtopic.php?f=43&t=2438&p=24610#p24610
--Recliq 13:43, 10 July 2011 (UTC)
