NzbDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/nzb
 
NzbDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/nzb
 +
 +
PostProcessConfigFile - /tmp/media/usb/USB[port number]/[hash number]/NZB/postprocess.conf  (''only if you use post-processing, allows NZBgetweb to edit the post processing parameters - very useful'')
 +
 +
PostProcessConfigTemplate - /usr/share/nzbget/nzbget-postprocess.conf
    
CheckSpaceDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/dst
 
CheckSpaceDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/dst
 
Server1.Level - 0
 
Server1.Level - 0
   −
Server1.Host - your usenet provider server URL (e.g. nntp.dude.com)
+
Server1.Host - your usenet provider server URL (''e.g. nntp.dude.com'')
    
Server1.Port - typically 563 for SSL, 119 for unencrypted - but your usenet provider should indicate a port to use (Always try to use SSL)
 
Server1.Port - typically 563 for SSL, 119 for unencrypted - but your usenet provider should indicate a port to use (Always try to use SSL)
 
MergeNzb - no
 
MergeNzb - no
   −
NzbProcess - ${MAINDIR}/nzbprocess.pl  (add the nzb process script which processes any nzb files you add to its watch queue. Here is my version [http://pastebin.com/zbFtftTf nzbprocess.pl] )
+
NzbProcess - ${MAINDIR}/nzbprocess.pl  (''add the nzb process script which processes any nzb files you add to its watch queue. Here is my version [http://pastebin.com/zbFtftTf nzbprocess.pl]'' )
    
DupeCheck  - no
 
DupeCheck  - no
 
Crccheck - yes
 
Crccheck - yes
   −
WriteBufferSize - 0 (you can set to -1 to improve performance but the WDTV is severely low on RAM so anything about 4 connections can consume too much RAM)
+
WriteBufferSize - 0 (''you can set to -1 to improve performance but the WDTV is severely low on RAM so anything about 4 connections can consume too much RAM'')
   −
DiskSpace - 10000 (stops the disks filling up!)
+
DiskSpace - 10000 (''stops the disks filling up!'')
       
''POSTPROCESSING
 
''POSTPROCESSING
   Exception encountered, of type "Error"