|
|
| | You CANNOT download with NZBgetweb without access to a Usenet server. | | You CANNOT download with NZBgetweb without access to a Usenet server. |
| | | | |
| − | '''NOTE:''' These instructions are for WDLXTV 1.02.21-0.4.7.3 | + | '''NOTE:''' These instructions are for WDLXTV 1.02.21-0.4.7.3 (or later) |
| | | | |
| | == Installing == | | == Installing == |
|
|
| | | | |
| | NzbDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/nzb | | NzbDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/nzb |
| | + | |
| | + | PostProcessConfigFile - /tmp/media/usb/USB[port number]/[hash number]/NZB/postprocess.conf (''only if you use post-processing, allows NZBgetweb to edit the post processing parameters - very useful'') |
| | + | |
| | + | PostProcessConfigTemplate - /usr/share/nzbget/nzbget-postprocess.conf |
| | | | |
| | CheckSpaceDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/dst | | CheckSpaceDir - /tmp/media/usb/USB[port number]/[hash number]/NZB/dst |
|
|
| | Server1.Level - 0 | | Server1.Level - 0 |
| | | | |
| − | Server1.Host - your usenet provider server URL (e.g. nntp.dude.com) | + | Server1.Host - your usenet provider server URL (''e.g. nntp.dude.com'') |
| | | | |
| | Server1.Port - typically 563 for SSL, 119 for unencrypted - but your usenet provider should indicate a port to use (Always try to use SSL) | | Server1.Port - typically 563 for SSL, 119 for unencrypted - but your usenet provider should indicate a port to use (Always try to use SSL) |
|
|
| | MergeNzb - no | | MergeNzb - no |
| | | | |
| − | NzbProcess - ${MAINDIR}/nzbprocess.pl (add the nzb process script which processes any nzb files you add to its watch queue. Here is my version [http://pastebin.com/zbFtftTf nzbprocess.pl] ) | + | NzbProcess - ${MAINDIR}/nzbprocess.pl (''add the nzb process script which processes any nzb files you add to its watch queue. Here is my version [http://pastebin.com/zbFtftTf nzbprocess.pl]'' ) |
| | | | |
| | DupeCheck - no | | DupeCheck - no |
|
|
| | Crccheck - yes | | Crccheck - yes |
| | | | |
| − | WriteBufferSize - 0 (you can set to -1 to improve performance but the WDTV is severely low on RAM so anything about 4 connections can consume too much RAM) | + | WriteBufferSize - 0 (''you can set to -1 to improve performance but the WDTV is severely low on RAM so anything about 4 connections can consume too much RAM'') |
| | | | |
| − | DiskSpace - 10000 (stops the disks filling up!) | + | DiskSpace - 10000 (''stops the disks filling up!'') |
| | | | |
| | | | |
|
|
| | ''POSTPROCESSING | | ''POSTPROCESSING |
| | | | |
Exception encountered, of type "Error"