Difference between revisions of "Sharing from OSX"
(Filled Sharing form OSX) |
(Formatting) |
||
| Line 5: | Line 5: | ||
== Setup NFS sharing == | == Setup NFS sharing == | ||
| − | '''1. Create | + | '''1. Create the exports file''' |
* With TextEdit | * With TextEdit | ||
Open a new document and type | Open a new document and type | ||
| − | + | /Users/yourusername/sharedfolder -ro -mapall=nobody -network 192.168.1 -mask 255.255.255.0 | |
What the above line tells is: | What the above line tells is: | ||
| Line 19: | Line 19: | ||
with Airport Utility or any other utility of your router). | with Airport Utility or any other utility of your router). | ||
| − | + | More lines pointing to different shared folders can be filled in. | |
Save the file with the name "exports" without extension | Save the file with the name "exports" without extension | ||
| Line 31: | Line 31: | ||
Open Terminal and enter | Open Terminal and enter | ||
| − | + | sudo vi /etc/exports | |
Once in vi, enter insert mode hitting | Once in vi, enter insert mode hitting | ||
| − | + | I | |
Enter | Enter | ||
| − | + | /Users/yourusername/sharedfolder -ro -mapall=nobody -network 192.168.1 -mask 255.255.255.0 | |
Exit insert mode hitting | Exit insert mode hitting | ||
| − | + | ESC | |
Enter | Enter | ||
| − | + | :wq! | |
to exit vi and write the file. | to exit vi and write the file. | ||
| Line 50: | Line 50: | ||
Enter | Enter | ||
| − | + | sudo nfsd enable | |
Restart the Mac | Restart the Mac | ||
| Line 59: | Line 59: | ||
Enter | Enter | ||
| − | + | sudo nfsd checkexports | |
(if a password is requested enter your login password) | (if a password is requested enter your login password) | ||
No output should be given. This confirms everything is fine. | No output should be given. This confirms everything is fine. | ||
Enter | Enter | ||
| − | + | showmount -e | |
The output should be approximately | The output should be approximately | ||
| − | + | Exports list on localhost: | |
| − | /Users/yourusername/sharedfolder192.168.1.0 | + | /Users/yourusername/sharedfolder192.168.1.0 |
'''4. Setup the net.mounts file for the WDTV/WDTVLive''' | '''4. Setup the net.mounts file for the WDTV/WDTVLive''' | ||
| Line 74: | Line 74: | ||
Edit the net.mounts file on your custom homebrew startup drive adding the line | Edit the net.mounts file on your custom homebrew startup drive adding the line | ||
| − | + | xmount 192.168.1.xxx:/Users/yourusername/sharedfolder nameofmountedshare nfs | |
| − | (where the IP-part must be | + | (where the IP-xxx-part must be completed to mirrir your Mac's complete IP on the local network) |
'''5. Reboot the WDTV/WDTVLive''' | '''5. Reboot the WDTV/WDTVLive''' | ||
| − | * Either switch off the WDTV and unplug it | + | * Either switch off the WDTV and unplug it about 30s |
| − | * Or in Terminal app enter | + | * Or in Terminal app enter |
| + | reboot | ||
Revision as of 03:45, 19 February 2010
The following has been tested under Mac OSX 10.5.x (Leopard). It might apply as well under OSX 10.6.x (Snow Leopard). On previous OSX versions you might have to use NetInfoManager (though setup might be troublesome).
Setup NFS sharing
1. Create the exports file
- With TextEdit
Open a new document and type
/Users/yourusername/sharedfolder -ro -mapall=nobody -network 192.168.1 -mask 255.255.255.0
What the above line tells is: I am sharing the directory /Users/yourusername/sharedfolder (the directory "sharedfolder" has to be created in Finder beforehand and populated with the files you want to share). The directory is read only. The directory is shared to any machine on the internal network under 192.168.1 (check if 192.168.1.x is the actual IP of the internally distributed network with Airport Utility or any other utility of your router).
More lines pointing to different shared folders can be filled in.
Save the file with the name "exports" without extension (or, once saved, take off the .txt in finder).
Move this file into /etc of the Mac's startup drive (this folder is hidden, so you need to use some third party app to make the invisible folders temporarily visible).
- With Terminal (Alternative method - a little more cumbersome)
Open Terminal and enter
sudo vi /etc/exports
Once in vi, enter insert mode hitting
I
Enter
/Users/yourusername/sharedfolder -ro -mapall=nobody -network 192.168.1 -mask 255.255.255.0
Exit insert mode hitting
ESC
Enter
:wq!
to exit vi and write the file.
2. Enable NFS sharing
Enter
sudo nfsd enable
Restart the Mac
3. Check the setup
Open Terminal app
Enter
sudo nfsd checkexports
(if a password is requested enter your login password) No output should be given. This confirms everything is fine.
Enter
showmount -e
The output should be approximately
Exports list on localhost: /Users/yourusername/sharedfolder192.168.1.0
4. Setup the net.mounts file for the WDTV/WDTVLive
Edit the net.mounts file on your custom homebrew startup drive adding the line
xmount 192.168.1.xxx:/Users/yourusername/sharedfolder nameofmountedshare nfs
(where the IP-xxx-part must be completed to mirrir your Mac's complete IP on the local network)
5. Reboot the WDTV/WDTVLive
- Either switch off the WDTV and unplug it about 30s
- Or in Terminal app enter
reboot
