Revision as of 13:58, 26 March 2010

Introduction

According to Wikipedia telnet is

 Telnet (teletype network) is a network protocol used on the Internet or local area networks to provide a
 bidirectional interactive communications facility. Typically, telnet provides access to a command-line 
 interface on a remote host via a virtual terminal connection which consists of an 8-bit byte oriented 
 data connection over the Transmission Control Protocol (TCP). User data is interspersed in-band with 
 TELNET control information.

The Linux manual page for "telnet" tells us this:

 The telnet command is used for interactive communication with another host using the TELNET protocol. 
 It begins in command mode, where it prints a telnet prompt ("telnet> "). If telnet is invoked with a 
 host argument, it performs an open command implicitly

Let's start

1. WDTV-Live IP Address

My WDTV-live is located at 192.168.1.102. One way to obtain this address is in your router. Another is navigating your WDTV to Settings>System setting>System information or to Network setting>Network setup and find your IP address.

2. Telnet to change password

Linux

Type this command:

telnet 192.168.1.102

Well, what are we doing? We are trying to enter like the Administrator(root) or Super User. You will see something like this

pint0@debian:~$ telnet 192.168.1.102
Trying 192.168.1.102...
Connected to 192.168.1.102.
Escape character is '^]'.

WDTVLIVE-6f1ec login: root
Password: 
#

NOTE: there is no password the first time (just press enter)

Windows

You have 2 options:

Command Prompt

1. Go to start>run type "cmd" or go to start>all programs>accessories>Command Prompt
2. type telnet [WTDV-live-ip] (where [WTDV-live-ip] is the IP address we found before)
3. type root as login and press 'enter' in password (as in no password)

Use PuTTY

1. Read the instructions here PuTTY with the only change being this option:

Now we can change the password, by typing the command passwd in the terminal and then your password twice (for confirmation). The following is the output of that command:

# passwd
Changing password for root
New password:
Bad password: too weak
Retype password:
Password for root changed by root

Well done, now you have root access and have a password, so you can use ssh access.

2. SSH Access

Note: you must first set a root password (via telnet, see above) before you can login using SSH.

  Secure Shell or SSH is a network protocol that allows data to be exchanged using a secure channel between two
  networked devices. Used primarily on GNU/Linux and Unix based systems to access shell accounts, SSH was designed
  as a replacement for Telnet and other insecure remote shells, which send information, notably passwords,
  in plaintext, rendering them susceptible to packet analysis. The encryption used by SSH provides confidentiality
  and integrity of data over an insecure network, such as the Internet.

Linux

You can do this

1. open a terminal (e.g. if you use GNOME go to Applications>Accessories>Terminal)
2. type ssh root@your_ip or ssh your_ip -l root type your password and you are done

Windows

Available options are:

Using PuTTY

• to enter you can use PuTTY a light program to connect to SSH and do other stuff (tunneling, etc.). Here is the link to download
• open putty and you will see something like this puty_imagen
• write your IP address and click open. Then this will appear putty_imagen_2
• click yes and login putty_imagen_3

Now you are connected to your WDTV-live machine.

Using SSH Secure Shell

• you can download from rapidshare or megaupload
• the program looks like this picture_ssh then click in quick connect
• next will appear this imagen "Host Name" is your ip_address and User Name is "root" then press connect
• then in here press yes
• if you see this congratulations you are in your WDTV-live machine.

Tips

If you'd like to learn more about using the Linux Shell over SSH/Telnet refer to this page