Difference between revisions of "Net.mounts"
| Line 68: | Line 68: | ||
If you need a username/password combination to access the shares use: | If you need a username/password combination to access the shares use: | ||
smbclient -L 192.168.0.1 -U <username> | smbclient -L 192.168.0.1 -U <username> | ||
| − | It should give you a listing of the | + | It should give you a listing of the shares on the host device. |
# smbclient -L 192.168.1.6 | # smbclient -L 192.168.1.6 | ||
creating lame upcase table | creating lame upcase table | ||
Revision as of 10:11, 16 August 2012
Contents |
Introduction
WDLXTV enables you to mount remote share as if they were locally connected.
Very important!
To see NFS/CIFS/CDROM/XFS/ReiserFS/NDAS devices, you must either:
- have a supported drive/flashdisk plugged in for xmounts to appear under Local Drives -> Folders
OR
- have CIFSINTERCEPTOR enabled and /conf/cifs-interceptor set up with shares to appear under Network Shares
The configuration is done in a file called net.mounts.
net.mounts is a file that can be put on either a USB drive connected to WDTV or in /conf directory on the WDTV itself.
It will mount network shares on boot which can then be accessed under Local Drives on the WDTV.
Examples
Example net.mounts to demonstrate options of xmount to be used in auto-mounting of network shares. Note: If you store a net.mounts file in /conf then it will ALSO execute on startup.
xmount "//192.168.0.1/ShareName" "ShareName" cifs
if your "guest" account is disabled, you must supply username and password
xmount "//192.168.0.1/ShareName" "ShareName" cifs "user=username,pass=password"
where 192.168.0.1 is the ip address your host device.
xmount 192.168.0.1:/nfsroot ShareName nfs
Note: some NFS's have problems with the default mount option of UDP. If you have issues playing or listing content, then add proto=tcp as the fourth parameter.
xmount 192.168.0.1:/nfsshare ShareName nfs "proto=tcp"
where 192.168.0.1 is the IP address your host device.
Mount a remote FTP
To find advanced options execute: curlftpfs --help in telnet.
xmount "ftp://192.168.0.1:21" "FTP Name" ftpfs "-o user=UserName:Password"
Mount a remote SSH server
sshfs *requires* keyless login
you can view your public key by executing: ssh-public-key
add your key to a remote machine by executing: ssh-copy-id user@server
to find options execute: sshfs --help
xmount "User@ServerName:Directory" "Server Name"sshfs "-o follow_symlinks"
combine previous xmounts using unionfs
unionfs takes a colon delimited list of 'ShareNames' and aggregates their content to the target directory structure is preserved. The following is an example, it mounts 4 remote shares 'hidden' so they are not visible in the OSD and then aggregates them. you hide an xmount by preceeding its 'ShareName' with a . (dot)
xmount "192.168.0.44:/movies" ".movies1" nfs xmount "192.168.0.233:/stuff" ".movies2" nfs xmount "192.168.0.101:/movies3" ".movies3" nfs xmount "192.168.0.151:/videos" ".movies4" nfs xmount ".movies1:.movies2:.movies3:.movies4" "ShareUnion" unionfs
Troubleshooting
With your web browser, type in the ip address of the WDTV device to access the Web Frontend. Login with "wdlxtv" for both username and password as default. Click on telnet client to access shell. Login with "root" as username and the default password is blank (blank=empty - It is suggested: change immediately using telnet, as SSH *won't* work!!). You'll see a WDLXTV welcome screen and then a # upon success. Next type this:
smbclient -L 192.168.0.1
where 192.168.0.1 is the ip address your host device.
If you need a username/password combination to access the shares use:
smbclient -L 192.168.0.1 -U <username>
It should give you a listing of the shares on the host device.
# smbclient -L 192.168.1.6
creating lame upcase table
creating lame lowcase table
Enter root's password:
Domain=[ALPHASECTOR] OS=[Unix] Server=[Samba 3.0.37]
Sharename Type Comment
--------- ---- -------
disk1 Disk
disk2 Disk
Movies Disk
Music Disk
IPC$ IPC IPC Service (Samba Server)
Domain=[ALPHASECTOR] OS=[Unix] Server=[Samba 3.0.37]
Server Comment
--------- -------
TRILLIAN Server
WDLXTV1 WDLXTV 1
WDLXTV2 WDLXTV 2
ZAPHOD Desktop
Workgroup Master
--------- -------
ALPHASECTOR TRILLIAN
As you can see there are four shares that can be mounted: disk1, disk2, Movies and Music.
With your web browser, type in the ip address of the WDTV device to access the Web Frontend. Login with "wdlxtv" for both username and password as default. Click on telnet client to access shell. Login with "root" as username and the default password is blank (blank=empty - It is suggested: change immediately using telnet, as SSH *won't* work!!). You'll see a WDLXTV welcome screen and then a # upon success. Next type this:
showmount -e 192.168.0.1
where 192.168.0.1 is the IP address your host device. it should give you a listing of the NFS exports that available on the server and what IP's are allowed to connect to them like this:
# showmount -e 192.168.0.1 Export list for 192.168.0.1: /media/MTB 192.168.0.0/24 /media/ext4ster 192.168.0.0/24 /media/biggyfat 192.168.0.0/24 /media/SevenFitty 192.168.0.0/24 /media/fattyOneFive 192.168.0.0/24
The above means that all of the NFS exports are allowed to be mounted by any host in 192.168.0.0 - 192.168.0.255
"No Media" Error
Problem:
The share gets mounted and shows up but when you enter it you get the message No media in the current folder.
Solution:
There is no general way to solve this because this is a very generic message the WDTV displays on various errors. Here are some starting points:
- When using NFS use TCP instead of UDP connections by adding the proto=tcp option
- Problems have been reported when Jumbo Frames was enabled on some network cards ([http://forum.wdlxtv.com/viewtopic.php?f=3&t=2608])
- Very often it's a permissions issue!
