Difference between revisions of "Install mt-daapd"
| Line 45: | Line 45: | ||
#</pre> | #</pre> | ||
| + | * First we'll do an update by giving this command : | ||
| + | <pre>ipkg update</pre>. | ||
| + | * Now install mt-daapd with : | ||
| + | <pre>ipkg install mt-daapd</pre> | ||
| + | The system will give some info back. Wait till you get the command prompt again. Don't pay too much attention to any error message that you might get. We'll get to that later. | ||
| + | * Just to test things, create a folder somewhere and copy 1 of your mp3's to it ( 1 mp3 will make scanning the folder go really fast). I used this folder just to test if everything works OK. When you have things working the way you want it, you can remove the folder and point mt-daapd to the right location where you keep all your music. | ||
| + | * You now have to edit the configuration file of mt-daapd. It's located overhere : | ||
| + | <pre>/opt/etc/mt-daapd/mt-daapd.conf</pre> | ||
| + | I used an FTP program to copy it to my desktop, edited it, saved it and then copied it back to it's original location. If you know how vi or nano works, that's much faster probably. | ||
| + | |||
| + | My edited mt-daapd.conf now looks like this (just for reference): | ||
| + | |||
| + | <pre> | ||
| + | web_root /opt/share/mt-daapd/admin-root | ||
| + | port 3689 | ||
| + | admin_pw mt-daapd | ||
| + | db_dir /opt/var/mt-daapd | ||
| + | mp3_dir /tmp/media/usb/USB1/4687-4AC5/mp3 | ||
| + | servername NSLU2 Music | ||
| + | runas guest | ||
| + | playlist /opt/etc/mt-daapd/mt-daapd.playlist | ||
| + | extensions .mp3,.m4a,.m4p | ||
| + | logfile /var/log/mt-daapd.log | ||
| + | rescan_interval 7200 | ||
| + | always_scan 0 | ||
| + | </pre> | ||
| + | As you can see, it's much shorter than the original file. I removed all the commented lines (the ones that start with #) to keep the file nice and short. | ||
| + | |||
| + | This is an important line in the file : | ||
| + | <pre>mp3_dir /tmp/media/usb/USB1/4687-4AC5/mp3</pre> | ||
| + | |||
| + | It points to the place where you keep your music. As you can see above, I created a testfolder called 'mp3' in the root of my usb stick. Change it so it points to your location. Always make sure you save your changes ! | ||
| + | |||
'''REST TO FOLLOW SOON''' | '''REST TO FOLLOW SOON''' | ||
Revision as of 10:19, 20 April 2011
mt-daapd is a multi-threaded DAAP server for Linux and other POSIX type systems. It allows a Linux box (like the WDTV gen1) to share audio files with iTunes users.
1. Before you start
Make sure that :
- you have a WDTV gen1 that has WDLXTV installed
- your WDTV gen1 is connected to your network (and has been assigned an IP address)
- you (kinda) know what telnet/ssh is and how to use it
2. Downloading optware
In order to get the Mt-daapd server running on your wdtv, you first need to have optware installed. So :
- first download opt.bin-02.zip from b-rad
- extract the opt.bin from the zip file and place it in the root of your boot device
- cold boot the wdtv (so completely disconnect from power and reconnect) with boot device (that contains opt.bin) connected
For more details about optware, see b-rads tutorial here
3. Installing mt-daapd
- connect to your wdtv via telnet/ssh.
You need the wdtv's IP address for this of course, so (1) check your router or (2) check the wdtv menu : settings, system, about
For more information about telnet/remote access, see : Telnet and ssh remote connections
Once you know the IP adress of your wdtv, connect to it with Telnet, Putty or another program.
You'll get a screen like this :
wdtv login:
enter 'root' (without the quotes) and if asked for a password, just leave that empty and press enter.
Now you're connected to your wdtv and you should see something like this :
BusyBox v1.10.0 (2009-02-15 05:09:42 CST) built-in shell (msh) Enter 'help' for a list of built-in commands. #
- First we'll do an update by giving this command :
ipkg update.
- Now install mt-daapd with :
ipkg install mt-daapd
The system will give some info back. Wait till you get the command prompt again. Don't pay too much attention to any error message that you might get. We'll get to that later.
- Just to test things, create a folder somewhere and copy 1 of your mp3's to it ( 1 mp3 will make scanning the folder go really fast). I used this folder just to test if everything works OK. When you have things working the way you want it, you can remove the folder and point mt-daapd to the right location where you keep all your music.
- You now have to edit the configuration file of mt-daapd. It's located overhere :
/opt/etc/mt-daapd/mt-daapd.conf
I used an FTP program to copy it to my desktop, edited it, saved it and then copied it back to it's original location. If you know how vi or nano works, that's much faster probably.
My edited mt-daapd.conf now looks like this (just for reference):
web_root /opt/share/mt-daapd/admin-root port 3689 admin_pw mt-daapd db_dir /opt/var/mt-daapd mp3_dir /tmp/media/usb/USB1/4687-4AC5/mp3 servername NSLU2 Music runas guest playlist /opt/etc/mt-daapd/mt-daapd.playlist extensions .mp3,.m4a,.m4p logfile /var/log/mt-daapd.log rescan_interval 7200 always_scan 0
As you can see, it's much shorter than the original file. I removed all the commented lines (the ones that start with #) to keep the file nice and short.
This is an important line in the file :
mp3_dir /tmp/media/usb/USB1/4687-4AC5/mp3
It points to the place where you keep your music. As you can see above, I created a testfolder called 'mp3' in the root of my usb stick. Change it so it points to your location. Always make sure you save your changes !
REST TO FOLLOW SOON
