Difference between revisions of "MVP Manual flash"
From WikiDLXTV
(Initial draft) |
|||
| Line 1: | Line 1: | ||
==Manual flashing for the MVP== | ==Manual flashing for the MVP== | ||
| + | |||
| + | Prerequisites: | ||
| + | * Need to be running a firmware from b-rad before update | ||
* Locate the firmware here (temporary path): http://downloads.wdlxtv.com/mvp/ | * Locate the firmware here (temporary path): http://downloads.wdlxtv.com/mvp/ | ||
| Line 5: | Line 8: | ||
** sata-tip.img-squashed.gz is for SATA flash | ** sata-tip.img-squashed.gz is for SATA flash | ||
* Loop-mount the firmware inside the MVP | * Loop-mount the firmware inside the MVP | ||
| − | mount -o loop mvphd-tip.zip temp2 | + | mount -o loop,ro mvphd-tip.zip temp2 |
* Manually flash the kernel | * Manually flash the kernel | ||
dd if=temp2/zbimage-linux-xload of=/dev/sigmblockd | dd if=temp2/zbimage-linux-xload of=/dev/sigmblockd | ||
Revision as of 05:02, 30 July 2012
Manual flashing for the MVP
Prerequisites:
- Need to be running a firmware from b-rad before update
- Locate the firmware here (temporary path): http://downloads.wdlxtv.com/mvp/
- mvphd-tip.zip is for USB flash
- sata-tip.img-squashed.gz is for SATA flash
- Loop-mount the firmware inside the MVP
mount -o loop,ro mvphd-tip.zip temp2
- Manually flash the kernel
dd if=temp2/zbimage-linux-xload of=/dev/sigmblockd
- Invalidate the root filesystem
dd if=/dev/zero of=/dev/sigmblocke bs=1024 count=1
- Place the mvphd.md5 and mvphd files in the root of a USB drive (ext3) attached to the MVP and reboot.
- Profit
