RootFS - Revision history

Mad ady: Added the 1.06 repos

2014-12-31T13:53:39Z

Added the 1.06 repos

Recliq at 19:27, 22 March 2012

2012-03-22T19:27:32Z

Recliq at 19:25, 22 March 2012

2012-03-22T19:25:45Z

Recliq at 18:22, 22 March 2012

2012-03-22T18:22:04Z

Recliq at 19:16, 13 February 2012

2012-02-13T19:16:31Z

Recliq at 19:15, 13 February 2012

2012-02-13T19:15:06Z

Recliq at 19:13, 13 February 2012

2012-02-13T19:13:03Z

Recliq at 13:19, 12 February 2012

2012-02-12T13:19:34Z

Recliq at 13:18, 12 February 2012

2012-02-12T13:18:52Z

Recliq: Created page with '{| align="right" | TOC |} = Introduction = Theres a little known feature thats in WDLXTV G2/Live/Plus that I think more people should be enjoying. There is a built in ab…'

2012-02-12T13:15:04Z

Created page with '{| align="right" | __TOC__ |} = Introduction = Theres a little known feature thats in WDLXTV G2/Live/Plus that I think more people should be enjoying. There is a built in ab…'

New page

{| align="right"
| __TOC__
|}

= Introduction =

Theres a little known feature thats in WDLXTV G2/Live/Plus that I think more people should be enjoying.

There is a built in ability to pivot and boot a firmware directly off a flash device or fast hard drive. This is not root.bin I'm talking about, this is all the files directly on your device. The device you use must be formatted in either ext2 or ext3, I suggest ext3 since the journal will come into use occasionally.

You can build your '''.rootFS''' either from an existing [http://wiki.wdlxtv.com/Difference_between_FW_formats#EXT3-Boot_.5Bnon-flash.5D Ext3Boot] '''root.bin''' or checkout the latest version from SVN.

= Installation =

== Format USB with ext2/3 ==

First thing to do is to format your designated drive with ext2/3 filesystem. You can do this on any linux system or on the WDTV itself.<br>

'''''In the process you will lose all data on the drive!!'''''<br>

Here's how to do this on WDTV, make sure the drive you want to use is the only drive connected!

* Find the device and unmount it
# mount | grep /tmp/media/usb/USB
/dev/sda1 on /tmp/media/usb/USB2/0fc063da-7518-4fab-83b2-31ff56c0adcc type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,utf8)
# umount /dev/sda1

* Delete any existing partitions on the drive and create a new linux partition (type 83) using fdisk.<br>Use '''p''' to print the current partition table, use '''d''' to delete existing partitions then use '''n''' to create a new partition (answer: primary, 1, defaults) and finaly write the changes with '''w'''.
<pre>
# fdisk /dev/sda

Command (m for help): p

Disk /dev/sda: 1001 MB, 1001848320 bytes
255 heads, 63 sectors/track, 121 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 122 978336 b Win95 FAT32
Partition 1 has different physical/logical endings:
phys=(120, 254, 63) logical=(121, 204, 18)

Command (m for help): d
Selected partition 1

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-121, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-121, default 121): Using default value 121

Command (m for help): w
The partition table has been altered.

# fdisk -l /dev/sda

Disk /dev/sda: 1001 MB, 1001848320 bytes
255 heads, 63 sectors/track, 121 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 121 971901 83 Linux
</pre>

* Create a filesystem in the partition
<pre>
# mkfs.ext3 /dev/sda1
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
60800 inodes, 242972 blocks
12148 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=251658240
8 block groups
32768 blocks per group, 32768 fragments per group
7600 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376

Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
</pre>

== Copy root filesystem... ==

=== ...from root.bin ===

Grab the latest [http://wiki.wdlxtv.com/Difference_between_FW_formats#EXT3-Boot_.5Bnon-flash.5D Ext3Boot] '''root.bin''', save it to the device you want to play with, and open your closest shell. Example below is done on the wdtv-live itself.

Replace USBx/xxx-xxx-xxx with USB1 or USB2 and your drives UUID!

cd /tmp/media/usb/USBx/xxx-xxx-xxx
mkdir ext3-boot
mount -o loop root.bin ext3-boot
mkdir .rootFS
rsync -avHS ext3-boot/ .rootFS
umount ext3-boot
rm root.bin
sync && sync && sync && reboot

Now when this boots you should be greeted with ext3-boot, without root.bin.

=== ...from SVN ===

With subversion you can run bleeding edge if you have an ext3 device:

cd /tmp/media/usb/USBx/xxx-xxx-xxx
mkdir .rootFS
svn co --username guest --password guest https://svn.wdlxtv.com/svn/wdlxtv-live/trunk .rootFS
chmod 4755 .rootFS/usr/bin/sudo
chmod 440 .rootFS/etc/sudoers
chmod 440 .rootFS/etc/sudoers.d/README
chmod 700 .rootFS/root/.ssh
sync && sync && sync && sync

Change the SVN URL to check out different versions:
* 1.02.21-WDLXTV-Live: https://svn.wdlxtv.com/svn/wdlxtv-live/trunk

* 1.05.04-WDLXTV-Live: https://svn.wdlxtv.com/svn/1.05.04-wdlxtv/live/trunk

* 1.05.04-WDLXTV-Plus: https://svn.wdlxtv.com/svn/1.05.04-wdlxtv/plus/trunk

== Notes: ==

* Your device '''MUST''' come alive fast to work

* Any device that is already known to work with [http://wiki.wdlxtv.com/Difference_between_FW_formats#EXT3-Boot_.5Bnon-flash.5D Ext3Boot] '''root.bin''' will work with '''.rootFS'''

* Only one external 3.5 hdd I've tried out of ~10 will boot '''.rootFS''' / '''root.bin''', the rest will not because they are too slow

* All 5 of my various 2.5" 'portable' external hdd's successfully boot '''root.bin''' / '''.rootFS
'''

== Advanced setup ==

=== Using ROOT_UUID ===

If your drive is slow you can try to force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in WEC or in telnet/shell:
<pre>
# blkid | grep sda1
/dev/sda1: UUID="bd292dba-874d-4f7f-8dea-fe0393c0b435" SEC_TYPE="ext2" TYPE="ext3"
config_tool -c ROOT_UUID='bd292dba-874d-4f7f-8dea-fe0393c0b435'
config_tool -s
</pre>

=== Using ROOT_TAG ===

You can use tags on '''.rootFS''' the same way as on '''root.bin'''. This way you can have different .rootFS version on the same drive.
* Tag your .rootFS
mv .rootFS .rootFS-102

* Set ROOT_TAG
config_tool -c ROOT_TAG=102
config_tool -s

== Links ==

* [http://forum.wdlxtv.com/viewtopic.php?f=43&t=228 How to boot wdlxtv directly from a flash device or hdd]

* [http://forum.wdlxtv.com/viewtopic.php?f=51&t=521 bleeding edge wdlxtv-live]

--[[User:Recliq|Recliq]] 13:15, 12 February 2012 (UTC)

← Older revision		Revision as of 13:53, 31 December 2014
Line 134:		Line 134:

	* 1.05.04-WDLXTV-Plus: https://svn.wdlxtv.com/svn/1.05.04-wdlxtv/plus/trunk		* 1.05.04-WDLXTV-Plus: https://svn.wdlxtv.com/svn/1.05.04-wdlxtv/plus/trunk
		+
		+	* 1.06.43-WDLXTV-Live: https://svn.wdlxtv.com/svn/1.06.43-wdlxtv/live/trunk
		+
		+	* 1.06.42-WDLXTV-Plus: https://svn.wdlxtv.com/svn/1.06.43-wdlxtv/plus/trunk

@@ Line 152: / Line 152: @@
 === Using ROOT_UUID ===
-If your drive is slow you can try to force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in '''WEC''' (''Main'' Tab, ''Advanced: Booting'') or in telnet/shell:
+If you have more than one drive connected you can force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in '''WEC''' (''Main'' Tab, ''Advanced: Booting'') or in telnet/shell:
 <pre>
 # blkid | grep sda1

@@ Line 151: / Line 151: @@
 === Using ROOT_UUID ===
-If your drive is slow you can try to force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in WEC (Main Tab, Advanced: Booting) or in telnet/shell:
+If your drive is slow you can try to force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in '''WEC''' (''Main'' Tab, ''Advanced: Booting'') or in telnet/shell:
 <pre>
 # blkid | grep sda1

@@ Line 154: / Line 154: @@
 If you have more than one drive connected you can force the boot drive by setting '''ROOT_UUID''' to the '''UUID''' of your drive. This can be done in '''WEC''' (''Main'' Tab, ''Advanced: Booting'') or in telnet/shell:
 <pre>
-# blkid | grep sda1
+blkid | grep sda1
 /dev/sda1: UUID="bd292dba-874d-4f7f-8dea-fe0393c0b435" SEC_TYPE="ext2" TYPE="ext3"
 config_tool -c ROOT_UUID='bd292dba-874d-4f7f-8dea-fe0393c0b435'
 config_tool -s

@@ Line 18: / Line 18: @@
 First thing to do is to format your designated drive with ext2/3 filesystem. You can do this on any linux system or on the WDTV itself.<br>
-'''''In the process you will lose all data on the drive!!'''''<br>
+'''''<big>In the process you will lose all data on the drive!!</big>'''''<br>
-Here's how to do this on WDTV, make sure the drive you want to use is the only drive connected!
+Here's how to do this on WDTV:
 * Find the device and unmount it

@@ Line 24: / Line 24: @@
 * Find the device and unmount it
   # mount | grep /tmp/media/usb/USB
-  /dev/sda1 on /tmp/media/usb/USB2/0fc063da-7518-4fab-83b2-31ff56c0adcc type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,utf8)
+  /dev/sda1 on /tmp/media/usb/USB2/bd292dba-874d-4f7f-8dea-fe0393c0b435 type vfat (rw,noatime,nodiratime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,utf8)
-  # umount /dev/sda1
+  # umount /tmp/media/usb/USB2/bd292dba-874d-4f7f-8dea-fe0393c0b435
 * Delete any existing partitions on the drive and create a new linux partition (type 83) using fdisk.<br>Use '''p''' to print the current partition table, use '''d''' to delete existing partitions then use '''n''' to create a new partition (answer: primary, 1, defaults) and finaly write the changes with '''w'''.

@@ Line 7: / Line 7: @@
 Theres a little known feature thats in WDLXTV G2/Live/Plus that I think more people should be enjoying.
-There is a built in ability to pivot and boot a firmware directly off a flash device or fast hard drive. This is not root.bin I'm talking about, this is all the files directly on your device. The device you use must be formatted in either ext2 or ext3, I suggest ext3 since the journal will come into use occasionally.
+There is a built in ability to pivot and boot a firmware directly off a flash device or fast hard drive. This is not '''root.bin''' I'm talking about, this is all the files directly on your device. The device you use must be formatted in either ext2 or ext3, I suggest ext3 since the journal will come into use occasionally.
 You can build your '''.rootFS''' either from an existing [http://wiki.wdlxtv.com/Difference_between_FW_formats#EXT3-Boot_.5Bnon-flash.5D Ext3Boot] '''root.bin''' or checkout the latest version from SVN.

@@ Line 163: / Line 163: @@
 You can use tags on '''.rootFS''' the same way as on '''root.bin'''. This way you can have different .rootFS version on the same drive.
-* Tag your .rootFS
+* Tag your '''.rootFS'''
   mv .rootFS .rootFS-102
-* Set ROOT_TAG
+* Set '''ROOT_TAG'''
   config_tool -c ROOT_TAG=102
   config_tool -s